Sea-Bird Electronics SBE 38 Manual do Utilizador descarregar pdf (Página 9)

Manual revision 006 Section 2: Description of SBE 19plus V2 SBE 19plus V2

• SBE 36 CTD Deck Unit and Power Data Interface Module (PDIM) -

These items provide power and real-time data handling capability over

single-conductor sea cables using the same method employed in the

SBE 32/SBE 33. The PDIM is a small pressure housing that is mounted on

or near the 19plus V2. It provides +15 VDC power to the 19plus V2 and

interfaces two-way RS-232 communications from the 19plus V2 to the

telemetry used on the sea cable. See the SBE 36/PDIM manual for

operating details.

• SBE 32 Carousel Water Sampler and Auto Fire Module (AFM) - The

AFM, mounted on or near the 19plus V2, allows the SBE 32 to operate

autonomously on non-conducting cables. The AFM supplies the power,

logic, and control commands to operate the SBE 32. The AFM monitors the

pressure data recorded by the 19plus V2 in real-time, closing water sampler

bottles at predefined pressures (depths) or whenever the system is stationary

for a specified period of time. Bottle number, firing confirmation, and five

scans of CTD data are recorded in the AFM memory for each bottle fired.

See the AFM manual for operating details.

SBE 32 Autonomous Operation

Note:

Seasave 7.18 or later also supports

acquisition of data from a NMEA

device connected directly to the

computer (instead of the deck unit).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 123 124

Sem comentários

Sea-Bird Electronics SBE 38 Manual do Utilizador Página 9