Sea-Bird Electronics SBE 38 Manual do Utilizador descarregar pdf (Página 121)

Manual revision 006 Appendix VI: Manual Revision History SBE 19plus V2

121

Appendix VI: Manual Revision History

Manual

Version

Date Description

001

11/07

• Release of firmware version 2 (19plus V2).

002

02/08

• Firmware 2.0c: now available with optional Quartz pressure sensor (PType=3). Add note to

dimension drawing for longer housing if using Quartz. Add taller cage to specifications, for use

with 19plus V2 with Quartz.

• Change pressure stability specifications to per year instead of per month.

• Add more detail on cleaning air bleed valve.

• Update configuration drawings (with 36/pdim, 32/33, 32/AFM, 55/33, 55) to include 19plus V2

• There were still a few references to Toolbar (Seaterm’s toolbar, new software does not have it),

remove them.

• Correct TVR (said columns 1–16 for external voltage, should be 1–6).

• Add new V2 Seaspares kits in replacement parts list.

• Add explanation for Hardware configuration commands: customer may change voltage sensor

types and serial numbers.

• Correct XML output in Output Format section, for OutputUCSD=Y and OutputFormat=5

(closing tag for voltage was incorrect).

003

11/08

• Delete SCPlusV2_RS232 software, add SeatermV2 software.

• Firmware 2.1 – add CommandSetVersion tag in GetHD reply; change StartLater limitation from

1 month to 90 days in future.

• Update for Seasave/SBE Data Processing 7.18, configuration file now allows selection of NMEA

connected directly to the computer.

• Remove CF0 from DCal response.

• Remove 33600 from valid baud rates.

• Expand on how to change baud.

• Update schematic of SBE 55 autonomous sampling, add SBE 50.

• Add J1, J2, etc. labeling on internal wiring showing what goes to what connector.

•

Strain gauge pressure sensor maintenance: – design change, no port plug anymore.

004

07/09

• Firmware 2.2: add information related to use of Aanderaa Optode as auxiliary RS-232 sensor.

• Clarify and correct sleep time between samples.

• Remove PType= from setup examples, mention that factory-set.

• Add information about Deployment Endurance Calculator, which is installed with Seasoft.

• Update SeatermV2 screen capture to show SBE 33 and 36 in instrument list.

• Update software name.

•

Add statement about compatibility with Vista.

005

12/09

• Seasave and SBE Data Processing 7.20a: Add information about .xmlcon file.

• Add more information about operation with GTD auxiliary sensor.

• Add more information about DelayBeforeSampling: does not apply to Optode.

• Add more information about GetLastSamples:x; do not need to stop logging before sending

command.

• Correct external power examples to incorporate 19plus V2 current draws (was still showing

19plus current draws).

• Add information required for CE certification.

• Add CE mark.

• Update SBE address.

• Update anti-foul label in Appendix with new Container Handling requirement and new address

1 2 ... 116 117 118 119 120 121 122 123 124

Comentários a estes Manuais

Sem comentários

Sea-Bird Electronics SBE 38 Manual do Utilizador Página 121

Comentários a estes Manuais