Sea-Bird Electronics SBE 38 Manual do Utilizador descarregar pdf (Página 70)

Manual revision 006 Section 4: Deploying and Operating SBE 19plus V2 SBE 19plus V2

OutputFormat=3 (engineering units in decimal)

Data is output in the order listed, with a comma followed by a space between

each parameter. Shown with each parameter are the number of digits and the

placement of the decimal point. Leading zeros are suppressed, except for one

zero to the left of the decimal point.

Uploaded Data (from GetSamples:b,e, or DDb,e)

1. Temperature (°C, ITS-90) = ttt.tttt

2. Conductivity (S/m) = cc.ccccc

3. (strain-gauge or Quartz - PType=1 or 3) Pressure (decibars) = pppp.ppp

4. (if Volt0=Y) External voltage 0= v.vvvv

5. (if Volt1=Y) External voltage 1 = v.vvvv

6. (if Volt2=Y) External voltage 2 = v.vvvv

7. (if Volt3=Y) External voltage 3 = v.vvvv

8. (if Volt4=Y) External voltage 4 = v.vvvv

9. (if Volt5=Y) External voltage 5 = v.vvvv

10. (if SBE38=Y) SBE 38 secondary temperature (°C, ITS-90) = ttt.tttt

11. (if WetLabs=Y) WET Labs RS-232 sensor = wwww, xxxx, yyyy

where wwww, xxxx, and yyyy are raw signal counts for each sensor;

yyyy all 0’s for dual sensor; xxxx and yyyy all 0’s for single sensor

12. (if GTD=Y or DualGTD=Y)

GTD #1 pressure (millibars) = ppppppppp / 100,000

13. (if GTD=Y or DualGTD=Y)

GTD #1 temperature (°C, ITS-90) = tt.ttt

14. (if DualGTD=Y)

GTD #2 pressure (millibars) = ppppppppp / 100,000

15. (if DualGTD=Y)

GTD #2 temperature (°C, ITS-90) = tt.ttt

16. (if Optode=Y) Optode oxygen (micromoles/liter) = oooo.ooo

17. (if OutputSal=Y) salinity (psu) = sss.ssss

18. (if OutputSV=Y) sound velocity (meters/second) = vvvv.vvv

19. Time (Moored mode [MM] only)

date, time = dd Mmm yyyy, hh:mm:ss

(day month year hour:minute:second)

Polled Data from SL, SLT, TS, TSS, or TSSOn:

If OutputUCSD=Y and the 19plus V2 is logging (autonomous sampling is in

progress), data is followed by density sigma-t in kg/m

(ddd.dddd), battery

voltage (vv.v), and operating current in mA (ccc.c), each separated by a

comma and a space. The rest of the data stream is as described above for

uploaded data.

Example: Profiling mode, 2 external voltages sampled,

example scan = ttt.tttt, cc.ccccc, pppp.ppp, v.vvvv, v.vvvv = 23.7658, 0.00019, 0.062, 0.0590, 0.1089

• Temperature = ttt.tttt = 23.7658; temperature (°C, ITS-90) = 23.7658

• Conductivity = cc.ccccc = 0.00019; conductivity (S/m) = 0.00019

• Pressure = pppp.ppp = 0.062; pressure (decibars) = 0.062

• First external voltage = v.vvvv = 0.0590; voltage = 0.0590 volts

• Second external voltage = v.vvvv = 0.1089; voltage = 0.1089 volts

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 123 124

Comentários a estes Manuais

Sem comentários

Sea-Bird Electronics SBE 38 Manual do Utilizador Página 70

Comentários a estes Manuais