Sea-Bird Electronics SBE 38 Manual do Utilizador descarregar pdf (Página 69)

Manual revision 006 Section 4: Deploying and Operating SBE 19plus V2 SBE 19plus V2

OutputFormat=2 (raw frequencies and voltages in decimal)

Data is output in the order listed, with a comma followed by a space between

each parameter. Shown with each parameter are the number of digits and the

placement of the decimal point. Leading zeros are suppressed, except for one

zero to the left of the decimal point.

1. Temperature A/D counts = tttttt

2. Conductivity frequency (Hz) = cccc.ccc

3. (if PType=1) Strain-gauge pressure A/D counts = pppppp

4. (if PType=1) Strain-gauge pressure sensor

temperature compensation voltage = v.vvvv

5. (if PType=3) Quartz pressure sensor

pressure frequency (Hz) = ppppp.ppp

6. (if PType=3) Quartz pressure sensor

temperature compensation voltage = v.vvvv

7. (if Volt0=Y) External voltage 0

external voltage 0= v.vvvv

8. (if Volt1=Y) External voltage 1 = v.vvvv

9. (if Volt2=Y) External voltage 2 = v.vvvv

10. (if Volt3=Y) External voltage 3 = v.vvvv

11. (if Volt4=Y) External voltage 4 = v.vvvv

12. (if Volt5=Y) External voltage 5 = v.vvvv

13. (if SBE38=Y) SBE 38 temperature (°C, ITS-90) = ttt.tttt

14. (if WetLabs=Y) WET Labs RS-232 sensor = wwww, xxxx, yyyy

where wwww, xxxx, and yyyy are raw signal counts for each sensor;

yyyy all 0’s for dual sensor; xxxx and yyyy all 0’s for single sensor

15. (if GTD=Y or DualGTD=Y)

GTD #1 pressure (millibars) = ppppppppp / 100,000

16. (if GTD=Y or DualGTD=Y)

GTD #1 temperature (°C, ITS-90) = tt.ttt

17. (if DualGTD=Y)

GTD #2 pressure (millibars) = ppppppppp / 100,000

18. (if DualGTD=Y)

GTD #2 temperature (°C, ITS-90) = tt.ttt

19. (if Optode=Y) Optode oxygen (micromoles/liter) = oooo.ooo

20. Time (Moored mode [MM] only)

date, time = dd Mmm yyyy, hh:mm:ss

(day month year hour:minute:second)

Example: Profiling mode, strain-gauge pressure sensor, 2 external voltages sampled,

example scan = tttttt, cccc.ccc, pppppp, v.vvvv, v.vvvv, v.vvvv

= 676721, 7111.133, 791745, 2.4514, 0.0590, 0.1089

• Temperature = tttttt = 676721;

temperature A/D counts = 676721

• Conductivity = cccc.ccc = 7111.133;

conductivity frequency = 7111.133 Hz

• Pressure = pppppp = 791745;

Pressure A/D counts = 791745

• Pressure sensor temperature compensation = v.vvvv = 2.4514;

Pressure temperature = 2.4514 volts

• First external voltage = v.vvvv = 0.0590;

voltage = 0.0590 volts

• Second external voltage = v.vvvv = 0.1089;

voltage = 0.1089 volts

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 123 124

Comentários a estes Manuais

Sem comentários

Sea-Bird Electronics SBE 38 Manual do Utilizador Página 69

Comentários a estes Manuais