Sea-Bird Electronics SBE 38 Manual do Utilizador descarregar pdf (Página 4)

Section 1: Introduction

This section includes a Quick Start procedure, and photos of a standard

SBE 38 shipment.

About this Manual

This manual is to be used with the SBE 38 Digital Oceanographic

Thermometer. It is organized to guide the user from installation through

operation and data collection. We’ve included detailed specifications,

command descriptions, maintenance and calibration information, and helpful

notes throughout the manual.

Sea-Bird welcomes suggestions for new features and enhancements of our

products and/or documentation. Please contact us with any comments or

suggestions (seabird@seabird.com or 425-643-9866). Our business hours are

Monday through Friday, 0800 to 1700 Pacific Standard Time (1600 to 0100

Universal Time) in winter and 0800 to 1700 Pacific Daylight Time (1500 to

0000 Universal Time) the rest of the year.

Quick Start

Follow these steps to get a Quick Start using the SBE 38 with a standard

RS-232 interface. The manual provides step-by-step details for performing

each task:

1. Test Power and Communications (see Section 3: Preparing SBE 38

for Deployment).

2. Deploy the SBE 38 (see Section 4: Deploying and Operating RS-232 SBE 38

for a complete description of setup, or see Appendix IV: Command Summary):

A. Establish setup parameters.

B. Check status (DS) and calibration coefficients (DC) to verify setup.

C. Use one of the following sequences to start sampling:

• If AutoRun=N: Send Go to start sampling continuously now, or

TS or TH to take a single sample.

• If AutoRun=Y: Apply power to start sampling

continuously now.

D. Deploy SBE 38.

For an SBE 38 with optional RS-485 interface, see Appendix III: RS-485

Interface for details.

1 2 3 4 5 6 7 8 9 ... 30 31

Sem comentários

Sea-Bird Electronics SBE 38 Manual do Utilizador Página 4